摘要

The elastic response of the knee joint in various loading and pathological conditions has been investigated using anatomically accurate geometry. However, it is still challenging to predict the poromechanical response of the knee in realistic loading conditions. In the present study, a viscoelastic, poromechanical model of the knee joint was developed for soft tissues undergoing large deformation. Cartilages and menisci were modeled as fibril-reinforced porous materials and ligaments were considered as fibril-reinforced hyperelastic solids. Quasi-linear viscoelasticty was formulated for the collagen network of these tissues and nearly incompressible Neo-Hookean hyperelasticity was used for the non-fibrillar matrix. The constitutive model was coded with a user defined FORTRAN subroutine, in order to use ABAQUS for the finite element analysis. Creep and stress relaxation were investigated with large compression of the knee in full extension. The contact pressure distributions were found similar in creep and stress relaxation. However, the load transfer in the joint was completely different in these two loading scenarios. During creep, the contact pressure between cartilages decreased but the pressure between cartilage and meniscus increased with time. This led to a gradual transfer of some loading from the central part of cartilages to menisci. During stress relaxation, however, both contact pressures decreased monotonically.

  • 出版日期2014-8