A Miniature Magnetic-Piezoelectric Thermal Energy Harvester

作者：Chen Chin Chung; Chung Tien Kan^*; Tseng Chia Yuan; Hung Chiao Fang; Yeh Po Chen; Cheng Chih Cheng

来源：IEEE Transactions on Magnetics, 2015, 51(7): 9100309.

DOI：10.1109/TMAG.2015.2395385

• Energy harvester
• magnetic
• piezoelectric
• power generator
• thermal
• thermomagnetic

In this paper, we report a miniature thermal energy harvester with a novel magnetic-piezoelectric design. The harvester consists of a soft magnetic Gd cantilever beam, a piezoelectric lead zirconate titanate sheet, an NdFeB hard magnet, silicon clamps, and a silicon frame. In this design, the harvester is driven by a temperature difference between a cold side and room temperature ambient air, unlike other magnetic-piezoelectric thermal energy harvesters that are driven by a temperature difference between a cold side and a hot side or between two hot sides. Experimental results show that with a temperature difference of 20 degrees C (cold side: 6.7 degrees C, hot side: 26.7 degrees C), the harvester produces a maximum peak-to-peak voltage of 37 mV and a root mean square voltage of 1.98 mV. The estimated maximum instantaneous power density and average power density is 21.7 nW/cm(3) and 62.9 pW/cm(3), respectively. Moreover, the total volume of our harvester (length x width x height: 6 x 3.5 x 3 mm) is 217 times lower than that of previous experimental harvesters and 38 times smaller than that of previous theoretical-modeled harvesters. Therefore, our harvester is the smallest machined magnetic-piezoelectric thermal energy harvester designed to date. These features enable our harvester to be more easily implemented and integrated with micro wireless sensors and thereby increase more self-powered wireless-sensing applications.

• 出版日期2015-7