Accuracy of the spring constant of atomic force microscopy cantilevers by finite element method

作者：Chen Bo Yi; Yeh Meng Kao^*; Tai Nyan Hwa

来源：Analytical Chemistry, 2007, 79(4): 1333-1338.

DOI：10.1021/ac061380v

Atomic force microscopy (AFM) probe with different functions can be used to measure the bonding force between atoms or molecules. In order to have accurate results, AFM cantilevers must be calibrated precisely before use. The AFM cantilever's spring constant is usually provided by the manufacturer, and it is calculated from simple equations or some other calibration methods. The spring constant may have some uncertainty, which may cause large errors in force measurement. In this paper, finite element analysis was used to obtain the deformation behavior of the AFM cantilever and to calculate its spring constant. The influence of prestress, ignored by other methods, is discussed in this paper. The variations of Young's modulus, Poisson's ratio, cantilever geometries, tilt angle, and the influence of image tip mass were evaluated to find their effects on the cantilever's characteristics. The results were compared with those obtained from other methods.

• 出版日期2007-2-15
• 单位清华大学