Numerical studies on a type of mechanical stirring in directional solidification method of multicrystalline silicon for photovoltaic applications

作者：Dumitrica S; Vizman D^*; Garandet J P; Popescu A

来源：Journal of Crystal Growth, 2012, 360: 76-80.

DOI：10.1016/j.jcrysgro.2012.01.011

• Computer simulation
• Fluid flow
• Stirring
• Ingot casting method
• Multicrystalline silicon

With the increase of the dimensions of multicrystalline silicon ingots obtained by directional solidification, it is necessary to propose new methods allowing to tailor the convection within the melt adapted for large scale crucibles. Melt stirring is widely used to influence the melt flow and the shape of the solid-liquid interface in crystal growth processes.
Therefore, the objective of this paper is to study by numerical methods the forced convection induced by an idealized stirrer on the melt flow and interface shape in a directional solidification furnace in order to see the potential of such a device.
Numerical simulations were carried out for a pilot scale furnace configuration (38 x 38 x 40 cm(3)). The computational domain used for the 3D-simulations consists of silicon melt and crystal. Time-dependent computations were carried out with the software STHAMAS3D.
It was obtained that, the stirrer's rotation leads to a strong increase of both the melt convection and the S-L interface deflection.

• 出版日期2012-12-1
• 单位中国地震局