Heat transfer performance of heat pipe for passive cooling of spent fuel pool

作者：Wang, Minglu; Xiong, Zhenqin; Gu, Hanyang; Ye, Cheng; Cheng, Xu

来源：Nuclear Power Engineering, 2014, 35(5): 62-65.

DOI：10.13832/j.jnpe.2014.05.0062

• Average heat transfers
• Condensation section
• Experimental study
• Heat transfer characteristics
• Heat transfer performance
• Loop Heat Pipe
• Operating temperature
• Passive cooling

A large-scale loop heat pipe has no electricity driven component and high efficiency of heat transfer. It can be used for the passive cooling of the SFP after SBO to improve the safety performance of nuclear power plants. In this paper, such a large-scale loop heat pipe is studied experimentally. The heat transfer rate, evaporator average heat transfer coefficient, operating temperature, operating pressure and ammonia flow rate have been obtained with the water flow ranging from 0.007 m/s to 0.02 m/s outside the evaporator section, heating water temperature in the range of 50 to 90℃, air velocity outside the condensation section ranging from 0.5 to 2.5 m/s. It is found that the heat transfer rate reaches as high as 20.1 kW. Parametric analysis indicates that the heat transfer rate and ammonia flow rate are influenced significantly by hot water inlet temperature and velocity, while beyond 1.5m/s, the effect of air velocity outside the condensation section is minor.

• 出版日期2014
• 单位上海交通大学