DETERMINING EFFECTIVE LENGTH FOR 40 HM-T STEEL BY USE OF NON-LOCAL LINE METHOD CONCEPT

作者：Robak Grzegorz^*; Krzyzak Daniel; Cichanski Artur

来源：Polish Maritime Research, 2018, 25(1): 128-136.

DOI：10.2478/pomr-2018-0015

• weight function
• effective length

In the paper, the concept of non-local line method is presented and used for determining the effective length for notched elements. Experimental tests and calculations were performed for 40 HM-T (42CrMo4+QT) steel made specimens of two types, i.e. smooth specimens, and notched specimens with notch radius equal to 0.2 mm, 0.5 mm, 0.8 mm, and 1 mm. The performed FEM calculations took into account the multi-linear hardening model and cyclic material properties. The concept of the presented non-local line method bases on finding the position of critical plane and determining the effective length, meant as the fracture process zone. During numerical stress gradient simulations, also the weight function was implemented. It was observed that the effective length increases as the load increases.

• 出版日期2018-4