科研之友
微信
新浪微博
Facebook
分享链接
摘要
Vacuum brazing of Cr18-Ni8 steel was performed using the BNi7+9%Cu mixed filler metal at the different brazing temperature. Microstructure, microhardness and shear strength were investigated by means of scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), hardness tester and AG-25TA electronic universal material testing machine. The results indicated that the brazed region was divided into isothermal solidification zone (ISZ) and athermal solidification zone (ASZ). The gamma-Ni (Cr, Fe, Cu) solid solution was formed in the ISZ, and its thickness would increase as brazing temperature increased. On the other hand, the generated microstructure was different by the change of chemical composition in the ASZ and its microhardness would increase as the brazing temperature increased. Elemental distribution indicated that Ni and Cu gradually gathered on both sides of the brazed joints as brazing temperature increased, while P and Cr were concentrated in the middle. In addition, the bonding behaviors of brazed joint was also illustrated based on the elemental distribution and microstructure distribution of brazed joint. Finally, an excellent brazing joint of Cr18-Ni8 steel was obtained at 980 degrees C for 30 min s and its shear strength was as high as 144 MPa.
- 出版日期2018-5
- 单位上海工程技术大学
