A Comparison Between ECAP and Conventional Extrusion for Consolidation of Aluminum Metal Matrix Composite

作者：Haghighi R Derakhshandeh^*; Jahromi S A Jenabali; Moresedgh A; Khorshid M Tabandeh

来源：Journal of Materials Engineering and Performance, 2012, 21(9): 1885-1892.

DOI：10.1007/s11665-011-0108-9

• ECAP
• extrusion
• metal matrix composite
• powder metallurgy

In this study, two powder consolidation techniques, equal channel angular pressing (ECAP) and extrusion, were utilized to consolidate attritioned aluminum powder and Al-5 vol.% nano-Al2O3 composite powder. The effect of ECAP and extrusion on consolidation behavior of composite powder and mechanical properties of subsequent compacts are presented. It is found that three passes of ECAP in tube at 200 A degrees C is capable of consolidating the composite to 99.29% of its theoretical density whereas after hot extrusion of the composite the density reached to 98.5% of its theoretical density. Moreover, extrusion needs higher temperature and pressing load in comparison to the ECAP method. Hardness measurements show 1.7 and 1.2 times higher microhardness for the consolidated composite and pure aluminum after ECAP comparing with the extruded ones, respectively. Microstructural investigations and compression tests demonstrate stronger bonds between the particles after three passes of ECAP than the extrusion. Furthermore, the samples after three passes of ECAP show better wear resistance than the extruded ones.

• 出版日期2012-9