ALUMINOTHERMIC REDUCTION OF Cr2O3 CONTAINED IN THE ASH OF THERMALLY TREATED LEATHER WASTE

作者：Wenzel B M^*; Zimmer T H; Fernandez C S; Marcilio N R; Godinho M

来源：Brazilian Journal of Chemical Engineering, 2013, 30(1): 141-154.

DOI：10.1590/s0104-66322013000100016

• Footwear leather waste
• Chromium oxide
• Aluminothermic reduction
• Low-carbon ferrochromium
• Statistical experimental design
• Optimisation

In this study the viability of utilising ashes with high chromium oxide content, obtained by thermal treatment of footwear leather waste, in the production of low-carbon ferrochromium alloy (Fe-Cr-LC) by aluminothermic reduction was investigated. The following key-factors were selected for process modelling: the quantity of aluminium (Al) employed in the reaction, the iron amount added, the iron compound (Fe and/or Fe2O3) used, and the chromic acid addition. The process was investigated using a 24 full factorial design where the percentage of Cr2O3 reduced was used as the response. Variance analysis was employed to determine the significant effects and to validate the obtained model. The model was useful for finding the optimal operating conditions, including the maximisation of chromium conversion and the gross margin. Both resulted in similar process conditions, with 76.8 +/- 12.3% of chromium being reduced to the metallic phase, and 1.65 +/- 0.52 USD (kg ash)(-1) as the gross margin. The qualities of some alloys obtained were investigated by scanning electron microscopy coupled with energy dispersive X-ray spectroscopy analysis (SEM/EDS). The results showed that the main problem for these alloys in a standard specification was the P and S content, suggesting that a pre-treatment is required.

• 出版日期2013-3