科研之友
微信
新浪微博
Facebook
分享链接
摘要
Purpose: The goal of this work was to set out a methodology for measuring and reporting small field relative output and to assess the application of published correction factors across a population of linear accelerators. %26lt;br%26gt;Methods and materials: Measurements were made at 6 MV on five Varian iX accelerators using two PTW T60017 unshielded diodes. Relative output readings and profile measurements were made for nominal square field sizes of side 0.5 to 1.0 cm. The actual in-plane (A) and cross-plane (B) field widths were taken to be the FWHM at the 50% isodose level. An effective field size, defined as FSeff = root A center dot B was calculated and is presented as a field size metric. FSeff was used to linearly interpolate between published Monte Carlo (MC) calculated k(Qclin), (Qmsr) (fclin) (fmsr) values to correct for the diode over-response in small fields. %26lt;br%26gt;Results: The relative output data reported as a function of the nominal field size were different across the accelerator population by up to nearly 10%. However, using the effective field size for reporting showed that the actual output ratios were consistent across the accelerator population to within the experimental uncertainty of +/- 1.0%. Correcting the measured relative output using k(Qclin, Qmsr) (fclin fmsr) at both the nominal and effective field sizes produce output factors that were not identical but differ by much less than the reported experimental and/or MC statistical uncertainties. %26lt;br%26gt;Conclusions: In general, the proposed methodology removes much of the ambiguity in reporting and interpreting small field dosimetric quantities and facilitates a clear dosimetric comparison across a population of linacs.
- 出版日期2013-12
- 单位河北医科大学
