Development of a Mg-based hydrogen-storage material by addition of Ni and NbF5 via milling under hydrogen

作者：Kwak Young Jun; Lee Seong Ho; Mumm Daniel R; Song Myoung Youp^*

来源：International Journal of Hydrogen Energy, 2015, 40(35): 11908-11916.

DOI：10.1016/j.ijhydene.2015.04.111

• Hydrogen storage materials
• Magnesium
• Milling under hydrogen
• Storing and releasing rates
• Ni and NbF5 addition

Milling under hydrogen was used to prepare samples with a composition of 80 wt% Mg + 14 wt% Ni + 6 wt% NbF5 (named 80Mg + 14Ni + 6NbP(5)). 80Mg + 14Ni + 6NbF(5) had a large effective storage capacity of hydrogen of approximately 5.6 wt% H. The activation of 80Mg + 14Ni + 6NbF(5) was done after one storing-releasing cycle. At n = 2 at 593 K, 80Mg + 14Ni + 6NbF(5) stored 3.92 and 5.57 wt% H after 2.5 and 60 min, respectively, under 12 bar H-2, and released 2.34 and 4.81 wt% H after 10 and 60 min, respectively, under 1.0 bar H-2. The following reaction happened during milling under hydrogen and at the early storing-releasing cycles: 14Mg + Ni + 4NbF(5) + 7H(2) -> MgH2 + Mg2NiH4 + Mg + 10MgF(2) + 4NbH(2). At a fairly low temperature of 423 K, the sample stored 0.28, 0.34, and 0.57 wt% H after 5, 10, and 60 min, respectively. The initial storing rate of 80Mg + 14Ni + 6NbF(5) increased as the temperature rose from the room temperature to 573 K since the effect of thermal activation is predominant, and fell as the temperature rose from 573 K to 623 K since the effect of decrease in the driving force for storing reaction is predominant.

• 出版日期2015-9-21