Alumina and Alumina-Baria Supported Cobalt Catalysts for DeNO(x): Influence of the Support and Cobalt Content on the Catalytic Performance

作者：Di Carlo G^*; Liotta L F; Pantaleo G; Venezia A M; Deganello G

来源：Topics in Catalysis, 2009, 52(13-20): 1826-1831.

DOI：10.1007/s11244-009-9360-8

• NO-SCR
• Cobalt oxide catalysts
• Barium effect
• Water tolerance

Co/Al2O3 and Co/Al2O3-BaO catalysts with low cobalt loading (0.1, 0.3 and 1 wt%) for the selective catalytic reduction (SCR) of NOx by C3H6 were prepared. The distribution of cobalt species was investigated by UV-vis diffuse reflectance spectroscopy and by H-2-TPR in order to identify the active cobalt species in hydrocarbons (HC)-selective catalytic reduction (SCR). It was found that the nature of cobalt species strongly depends on the cobalt loading as well as on the properties of the support. The barium addition to the alumina slows down solid state diffusion processes, improving the thermal stability of the support and preventing diffusion of cobalt into the bulk. Highly dispersed surface Co2+ species over alumina were identified as active sites in the NO-SCR process. Accordingly, a high concentration of surface Co2+ sites in Co 1 wt%/ Al2O3 improves the catalytic performance in NO-SCR, the long term stability as well as the water tolerance. On the contrary, the formation of Co3O4 particles in Co 1 wt%/ Al2O3-BaO promotes the propylene oxidation by oxygen, decreasing the activity and selectivity of the catalyst in NO reduction.

• 出版日期2009-12