Design of 3-D Printed Concentric Tube Robots

作者：Morimoto Tania K^*; Okamura Allison M

来源：IEEE Transactions on Robotics, 2016, 32(6): 1419-1430.

DOI：10.1109/TRO.2016.2602368

• Additive manufacturing
• concentric tubes
• continuum robots
• personalized surgical robots
• 3-D printing

Concentric tube surgical robots are minimally invasive devices with the advantages of snake-like reconfigurability, long and thin form factor, and placement of actuation outside the patient's body. These robots can also be designed and manufactured to acquire targets in specific patients for treating specific diseases in a manner that minimizes invasiveness. We propose that concentric tube robots can be manufactured using 3-D printing technology on a patient-and procedure-specific basis. In this paper, we define the design requirements and manufacturing constraints for 3-D printed concentric tube robots and experimentally demonstrate the capabilities of these robots. While numerous 3-D printing technologies and materials can be used to create such robots, one successful example uses selective laser sintering to make an outer tube with a polyether block amide and uses stereolithography to make an inner tube with a polypropylene-like material. This enables a tube pair with precurvatures of 0.0775 and 0.0455 mm(-1), which can withstand strains of 20% and 5.5% for the outer and inner tubes, respectively.

• 出版日期2016-12