An atom probe perspective on phase separation and precipitation in duplex stainless steels

作者：Guo Wei; Garfinkel David A; Tucker Julie D; Haley Daniel; Young George A; Poplawsky Jonathan D

来源：Nanotechnology, 2016, 27(25): 254004.

DOI：10.1088/0957-4484/27/25/254004

• atom probe tomography
• thermal embrittlement
• Cu cluster
• G-phase
• Fe-Cr alloy
• phase separation

Three-dimensional chemical imaging of Fe-Cr alloys showing Fe-rich (alpha)/Cr-rich (alpha') phase separation is reported using atom probe tomography techniques. The extent of phase separation, i.e., amplitude and wavelength, has been quantitatively assessed using the Langer-Bar-on-Miller, proximity histogram, and autocorrelation function methods for two separate Fe-Cr alloys, designated 2101 and 2205. Although the 2101 alloy possesses a larger wavelength and amplitude after annealing at 427 degrees C for 100-10 000 h, it exhibits a lower hardness than the 2205 alloy. In addition to this phase separation, ultra-fine Ni-Mn-Si-Cu-rich G-phase precipitates form at the alpha/alpha' interfaces in both alloys. For the 2101 alloy, Cu clusters act to form a nucleus, around which a Ni-Mn-Si shell develops during the precipitation process. For the 2205 alloy, the Ni and Cu atoms enrich simultaneously and no core-shell chemical distribution was found. This segregation phenomenon may arise from the exact Ni/Cu ratio inside the ferrite. After annealing for 10 000 h, the number density of the G-phase within the 2205 alloy was found to be roughly one order of magnitude higher than in the 2101 alloy. The G-phase precipitates have an additional deleterious effect on the thermal embrittlement, as evaluated by the Ashby-Orowan equation, which explains the discrepancy between the hardness and the rate of phase separation with respect to annealing time.

• 出版日期2016-6-24