Analysis of CT stress during horizontal annular-delivery sand fracturing

作者：Fuping Feng^*; Chi Ai; Fahao Yu; Yishan Wang; Junran Zhou; Chao Guo

来源：Manufacturing Technology, 2015, 15(2): 130-136.

DOI：10.21062/ujep/x.2015/a/1213-2489/mt/15/2/130

• Annular-delivery sanding
• Hydrajet perforating
• Method of mechanical analysis
• Multistage fracturing
• Pump rate
• Stimulated reservoir volumes
• Strength failures
• Ultra-low permeability reservoirs

The CT-conveyed hydrajet perforating and annular-delivery sand fracturing in horizontal well can meet the requirements of large-scale stimulated reservoir volume and separate-layer multistage fracturing. So it is always as an effective technique to stimulate low and ultra-low permeability reservoirs. Unfortunately,in the process of annular- delivery sanding fracturing, the CT will endures a larger piston force, the accuracy of fractured intervals and the security of fracturing string can't be guaranteed. In this paper, with the method of mechanical analysis on horizontal CT and numerical simulation on packer's anchorage force, we obtain the effect of CT pump rate on its stress: When CT pump rate is smaller, the maximum axial and Von Mises stress happen at the CT bottom, where there exists a risk of strength failure;As CT pump rate increases, axial stress and Von Mises stress decreases gradually;The maximum safety factor can be obtained at the CT critical pump rate. Therefore, for annulardelivery sand fracturing, we'd better insure CT pump rate more than the critical value.

• 出版日期2015