科研之友
微信
新浪微博
Facebook
分享链接
摘要
The most significant task in the solar cell industry today is to minimize the cost of solar cell development, thereby establishing grid parity early. One way to achieve this goal is to reduce the thickness of silicon solar cell, which would subsequently result in reduction in raw silicon material costs. The most commonly used tabbing process in solar cell production today is the heating bar process. This process utilizes electric heating bars to heat the ribbons on solar cells. In this study, a laser tabbing machine was developed to overcome the problems of tabbing process of heating bar technique for a thin crystalline silicon solar cell. An electric test and peeling test were executed on soldering ribbon on solar cells. The results indicate that the bonding force of ribbon does not affect electrical output of the solar cell. The electric power of soldered solar cell was decreased around 5% in output as compared to the original unsoldered solar cell. The electric powers of the laser soldered module and the heating-bar soldered module were very close. The decline in efficiency of both modules was about 1.13%. As a result of this study, it was confirmed that the laser tabbing system developed in this research can be applied in module manufacturing processes.
- 出版日期2014-8
