科研之友
微信
新浪微博
Facebook
分享链接
摘要
Part I established, via extensive transmission electron microscopy investigations, that the type of dislocation structure formed in metals of medium-to-high stacking fault energy upon deformation in tension or rolling to moderate strain levels (<= 0.8) depends strongly on crystallographic grain orientation. This paper analyzes the grain orientation-dependent structures in terms of the active slip systems, focusing on the crystallographic plane of extended planar boundaries (geometrically necessary boundaries). The analysis establishes slip systems as the factor controlling the dislocation structure. Five fundamental slip classes, consisting of one to three active slip systems, have been identified. Multiple activation of these slip classes is also considered. The slip classes give rise to different types of dislocation structure, of which all except one contains geometrically necessary planar boundaries aligning with unique crystallographic planes (not necessarily slip planes). A slip class leads to the same type of structure, irrespective of the macroscopic deformation mode, as also demonstrated by successful predictions for shear deformation.
- 出版日期2007
