A new linear back projection algorithm to electrical tomography based on measuring data decomposition

作者：Sun, Benyuan^*; Yue, Shihong; Cui, Ziqiang; Wang, Huaxiang

来源：Measurement Science and Technology, 2015, 26(12): 125402.

DOI：10.1088/0957-0233/26/12/125402

• electrical tomography
• measuring data decomposition
• linear back projection
• equipotential area
• positive/negative sensing areas
• sensitivity matrix

As an advanced measurement technique of non-radiant, non-intrusive, rapid response, and low cost, the electrical tomography (ET) technique has developed rapidly in recent decades. The ET imaging algorithm plays an important role in the ET imaging process. Linear back projection (LBP) is the most used ET algorithm due to its advantages of dynamic imaging process, real-time response, and easy realization. But the LBP algorithm is of low spatial resolution due to the natural 'soft field' effect and 'ill-posed solution' problems; thus its applicable ranges are greatly limited. In this paper, an original data decomposition method is proposed, and every ET measuring data are decomposed into two independent new data based on the positive and negative sensing areas of the measuring data. Consequently, the number of total measuring data is extended to twice as many as the number of the original data, thus effectively reducing the 'ill-posed solution'. On the other hand, an index to measure the 'soft field' effect is proposed. The index shows that the decomposed data can distinguish between different contributions of various units (pixels) for any ET measuring data, and can efficiently reduce the 'soft field' effect of the ET imaging process. In light of the data decomposition method, a new linear back projection algorithm is proposed to improve the spatial resolution of the ET image. A series of simulations and experiments are applied to validate the proposed algorithm by the real-time performances and the progress of spatial resolutions.

• 出版日期2015-12
• 单位天津大学