科研之友
微信
新浪微博
Facebook
分享链接
摘要
Although the residual distortion of 6056 Al alloy sheet after friction stir welding (FSW) is smaller than that after fusion welding, it is still a significant defect for the assembly and application of welded structure.. In order to investigate and predict the residual distortion of Al alloy sheet, after FSW, a 3D thermo mechanical model was established based on experimental conditions to simulate the FSW process. In the model, heat input was computed based on the torque data measured during experiment, and heat transfer between welded sheet mid fixtures was simplified in the way of convection, and the properties of 6056 Al alloy were considered as temperature function, and tool loads were taken into account during the mechanical analysis. The simulation results show that. the. distribution of longitudinal residual stress along the width of sheet is asymmetrical, and the residual distortion corresponds well with experimental results both in distortion pat tern and deformation Values oil the whole sheet.
- 出版日期2009-2-11
- 单位清华大学
