科研之友
微信
新浪微博
Facebook
分享链接
摘要
Nanostructured diamond-like carbon coatings with various silicon-oxide content were deposited on different substrate materials (silicon, glass, polycarbonate and steel) in capacitively coupled r.f. discharge (13.56 MHz). The structure of the prepared films was studied with infrared absorption spectroscopy (FTIR) and X-ray photoelectron spectroscopy. Complete atomic compositions, including hydrogen content and film densities, were determined by combination of RBS and ERD analyses. The complex dielectric function of the films was determined from ellipsometric measurements in the range 1.5-5.2 eV. Matrix Assisted Laser Desorption-Ionisation - Time of Flight Mass Spectrometry (MALDI-TOF) was used to study the deposited films. The mechanical properties of prepared coatings (e. g. hardness, elastic modulus, fracture toughness, coating/substrate adhesion etc.) were studied by means of depth sensing indentation technique using Fischerscope H100 tester. The tribological properties were studied using CSM pin-on-disc tester. The effect of intrinsic stress on the coating properties was investigated. The variation in SiO(x) content enabled to minimize the intrinsic compressive stress in coatings. Analysis of the evolved crack morphology by means of optical microscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed a significant increase in interfacial fracture toughness for the DLC:SiO films compared to the pure DLC films. On the basis of above described investigation nanocomposite multilayer coatings with enhanced mechanical properties (high hardness, adhesion, fracture toughness, low intrinsic stress) were designed.
- 出版日期2007
