科研之友
微信
新浪微博
Facebook
分享链接
摘要
Redox-pair-based thermochemical cycles are considered as a very promising option for the production of hydrogen via renewable energy sources like concentrated solar energy and raw materials like water. This work concerns the synthesis of various spinel materials of the iron and aluminum families via combustion reactions in the solid and in the liquid-phase and the testing of their suitability as redox-pair materials for hydrogen production by water splitting via thermochemical cycles. The effects of reactants%26apos; stoichiometry (fuel/oxidizer) on the combustion synthesis reaction characteristics and on the products%26apos; phase composition and properties were studied. By fine-tuning the synthesis parameters, a wide variety of single-phase, pure and well crystallized spinels could be controllably synthesized. Post-synthesis, high-temperature calcination studies under air and nitrogen at the temperature levels encountered during solar-aided thermochemical cyclic operation have eliminated several material families due to phase composition instabilities and identified among the various compositions synthesized NiFe2O4 and CoFe2O4 as the two most suitable for cyclic water splitting - thermal reduction operation. First such thermochemical cyclic tests between 800 and 1400 degrees C with NiFe2O4 and CoFe2O4 in powder form in a fixed bed laboratory reactor have demonstrated capability for cyclic operation and alternate hydrogen/oxygen production at the respective cycle steps for both materials. Under the particular testing conditions the two materials exhibited hydrogen/oxygen yields of the same magnitude and similar temperatures of oxygen release during thermal reduction.
- 出版日期2012-6
