Ultra-thin GaAs single-junction solar cells integrated with a reflective back scattering layer

作者：Yang Weiquan^*; Becker Jacob; Liu Shi; Kuo Ying Shen; Li Jing Jing; Landini Barbara; Campman Ken; Zhang Yong Hang

来源：Journal of Applied Physics, 2014, 115(20): 203105.

DOI：10.1063/1.4878156

This paper reports the proposal, design, and demonstration of ultra-thin GaAs single-junction solar cells integrated with a reflective back scattering layer to optimize light management and minimize non-radiative recombination. According to our recently developed semi-analytical model, this design offers one of the highest potential achievable efficiencies for GaAs solar cells possessing typical non-radiative recombination rates found among commercially available III-V arsenide and phosphide materials. The structure of the demonstrated solar cells consists of an In0.49Ga0.51P/GaAs/In0.49Ga0.51P double-heterostructure PN junction with an ultra-thin 300 nm thick GaAs absorber, combined with a 5 mu m thick Al0.52In0.48P layer with a textured as-grown surface coated with Au used as a reflective back scattering layer. The final devices were fabricated using a substrate-removal and flip-chip bonding process. Solar cells with a top metal contact coverage of 9.7%, and a MgF2/ZnS anti-reflective coating demonstrated open-circuit voltages (V-oc) up to 1.00 V, short-circuit current densities (J(sc)) up to 24.5 mA/cm(2), and power conversion efficiencies up to 19.1%; demonstrating the feasibility of this design approach. If a commonly used 2% metal grid coverage is assumed, the anticipated J(sc) and conversion efficiency of these devices are expected to reach 26.6 mA/cm(2) and 20.7%, respectively.

• 出版日期2014-5-28