Displacement of Screw-Retained Splinted and Nonsplinted Restorations into Implants with Conical Internal Connections

作者：Yilmaz Burak^*; Seidt Jeremy D; Clelland Nancy L

来源：International Journal of Oral & Maxillofacial Implants, 2014, 29(6): 1289-1292.

DOI：10.11607/jomi.3612

• displacement
• implant
• internal connection
• screw-retained

Purpose: Variable abutment displacement could potentially affect proximal contacts, incisal edge position, or occlusion of implant-supported prostheses. This study aimed to measure and compare displacements of splinted and nonsplinted restorations into implants featuring internal conical connections as screws were tightened by hand or by torque driver. Materials and Methods: A stereolithic resin model was printed using computed tomography data from a patient missing mandibular left first and second molars. Two 5.0 x 11-mm implants were placed in the edentulous site using a surgical guide. Two sets (splinted and nonsplinted) of gold screw-retained prostheses were made indirectly to fit the implants in the stereolithic model representing the patient. The axial position of the crowns relative to a fixed location on the model was recorded following hand tightening using the three-dimensional image correlation technique and image correlation software. A pair of high-resolution digital cameras provided a synchronized view of the model during the experiment. Relative crown positions were again recorded after tightening with a torque driver to 25 Ncm. Testing was repeated randomly three times for each set of crowns. Displacement data after torque tightening were compared using a factorial analysis of variance with JMP 9.0 software (SAS) followed by a Tukey-Kramer post hoc test (alpha = .05). Interproximal contacts were evaluated using an 8-pm tin foil shim after tightening by hand and torque driver. Results: Displacements for splinted and nonsplinted restorations differed only in a buccal direction. The nonsplinted crowns displaced significantly more than splinted crowns. Discernible differences were observed for the tin foil shim when dragged through proximal contacts following hand versus torque tightening. Conclusion: Differences between screw tightening by hand or torque driver should be taken into consideration during laboratory and clinical adjustments to prevent esthetic and functional complications.

• 出版日期2014-12