科研之友
微信
新浪微博
Facebook
分享链接
摘要
A closed-loop circuit is developed in this work for tracking the resonant frequency of silicon microcantilever mass sensors. The proposed closed-loop system is mainly based on a phase-locked loop (PLL) circuit. To lock onto the resonant frequency of the resonator, an actuation signal generated from a voltage-controlled oscillator is fed back to the input reference signal of the cantilever sensor. In addition to the PLL circuit, an instrumentation amplifier and an active low-pass filter are connected to the system for gaining the cantilever output signal and transforming a rectangular PLL output signal into a sinusoidal signal used for sensor actuation, respectively. To demonstrate the functionality of the system, a self-sensing silicon cantilever resonator with a built-in piezoresistive Wheatstone bridge is fabricated and integrated with the circuit. A piezoactuator is employed to actuate the cantilever into resonance. From the measurement results, the integrated closed-loop system is successfully employed to characterize a 9.4 kHz cantilever sensor under ambient temperature cross-sensitivity yielding a sensor temperature coefficient of -32.8 ppm/A degrees C. In addition to it, the sensor was also exposed to exhaled human breath condensates and e-cigarette aerosols to test the sensor sensitivity obtained from mass-loading effects. With a high frequency stability (i.e., a frequency deviation as low as 0.02 Hz), this developed system is intended to support the miniaturization of the instrumentation modules for cantilever-based nanoparticle detectors (CANTORs).
- 出版日期2014-4
