Abrasive wear map of polymer tapes in sand dust environment

作者：Wu Tong Hai^*; Diao Dong Feng

来源：Journal of China University of Mining and Technology, 2006, 16(2): 128-131.

• Abrasive wear
• ATM (Automatic Teller Machine)
• Mechanical deformation factors
• Optical topography photos
• PEN (Polyethylene-2, 6-naphthalenedicarboxylate)
• PI (Polyimide)
• Polymer tapes
• Sand dust environment
• Sliding distances
• Specific wear rates
• Wear cross section areas
• Wear map
• Wear volumes

To make clear the wear conditions of ATM (Automatic Teller Machine) tribosystem when servicing in Chinese sand dust environment, abrasive wear of two kinds of polymer tapes specified for ATM, PI (Polyimide) and PEN (Polyethylene-2, 6-naphthalenedicarboxylate), was investigated in simulated sand dust environment with ATM tape-scraper tribosystem under various conditions of loads and sliding distances. The surface profiles of worn tape were measured with a surface profiler in order to calculating the wear cross-section areas and the wear volumes. The specific wear rates of polymer tapes were calculated under load conditions of 0.6, 1 and 1.5 N, and wear mechanisms were investigated with optical topography photos. As main results, the specific wear rates show stage variations in the wear process and the wear resistance of polymer tape shows good relationship with the mechanical deformation factors. In consideration of the service life, four wear models are generalized according to the magnitude of specific wear rates, which include no wear, mild wear, normal wear and severe wear model and the corresponding wear mechanisms for the four wear models are discussed with typical worn topographies. Based on the wear models and corresponding wear mechanisms, the abrasive wear maps of two polymer tapes servicing in sand dust environments are concluded for its industrial applications.

• 出版日期2006