Processing and characterization of electrospun poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanofibrous membranes

作者：Cheng Mei Ling; Lin Chih Chung; Su Hsiao Lang; Chen Po Ya; Sun Yi Ming^*

来源：Polymer, 2008, 49(2): 546-553.

DOI：10.1016/j.polymer.2007.11.049

• electrospinning
• polyhydroxyalkanoates
• nanofibers

Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) nanofibrous membranes were first fabricated via electrospinning from chloroform (CHCl3) or CHCl3/dimethylformamide (DMF) polymer solutions. The electrospinning conditions such as the polymer concentration, the solvent composition, and the applied voltage were optimized in order to get smooth and nano-sized fibers. The crystalline structure, the melting behaviors and the mechanical proper-ties of the obtained nanofibrous membranes were characterized. With pure CHCl3 as the solvent in the electrospinning process, the finest smooth PHBHHx fibers were about I mu m in diameter. When DMF is added to CHCl3 as a co-solvent, the conductivity and volatility of the solution increased and reduced, respectively, and the electrospinnability of the polymer solution increased as a result. The averaged diameters of PHBHHx fibers could be reduced down to 300-500 nm when the polymer concentration was kept at 3 wt%. the ratio of DMF/CHCl3 was maintained at 20/80 (wt%), and the applied voltage was fixed at 15 kV during electrospinning. WAXD and DSC results indicated that the crystallization of the PHBHHx nanofibers was restricted to specific crystalline planes due to the molecular orientation along the axial direction of the fibers. The crystallization behaviors of the electrospun nanofibers were significantly different from that of the cast membranes because of the rapid solidification and the one-dimensional fiber size effect in the electrospinning process. Mechanically. the electrospun PHBHHx nanofibrous membranes were soft but tough, and their elongation at break averaged 240-300% and could be up to 450% in some cases. This study demonstrated how the size of electrospun PHBHHx fibers could be reduced by adding DMF in the solvent and gave a clue of the presence of oriented molecular chain packing in the crystalline phase of the electrospun PHBHHx fibers.

• 出版日期2008-1-21