科研之友
微信
新浪微博
Facebook
分享链接
摘要
There is less research on vertical sculptured grinding technology. Especially in high vertical surface grinding process with the cup abrasive wheel, the thermal damage is prone to happen and undermine the grinding surface integrity. This problem limits to improve the grinding efficiency and the grinding ratio greatly. Through the analysis of vertical surface grinding process and features in depth, this paper revealed the inherent mechanism of higher grinding temperature in the process of vertical sculptured grinding using the cup wheel. Based on the previous research achievements, the grinding experiments on TC4 (Ti-6Al-4V) and GH4169 are carried out utilizing the self-inhaling internal cooling wheel. The experimental results show that the self-inhaling internal cooling wheel can efficiently reduce the grinding surface temperature. Moreover, the inherent mechanism of reducing the grinding temperature using the internal cooling method is revealed. Meanwhile, under the same grinding conditions, the grinding ratio during the experiments on GH4169 using self-inhaling internal cooling method is about 3 times as high as using conventional external cooling method. And the grinding forces can be reduced by about 20%. This research revealed the inherent mechanism of higher grinding temperature in the process of vertical sculptured grinding using the cup wheel, which provides theoretical basis for the design and application of self-inhaling internal cooling wheel. At the same time, an efficient and non-invasive surface grinding method of TC4 and GH4169 is presented.
- 出版日期2014-1
- 单位北京航空航天大学
