Fe3+ in pottery: Distinction of the use for cooking and production parameters

作者：Mangueira G M; Teixeira S; Silva F A; Franco R W A^*

来源：Applied Clay Science, 2016, 129: 88-91.

DOI：10.1016/j.clay.2016.04.024

• Pottery technology
• Electron paramagnetic resonance
• Fe3+
• Firing temperature
• Ancient pan

The estimated firing temperature and atmosphere in which a piece of pottery was produced can be identified by comparing the concentration of Fe3+ between the piece of pottery and clay with a similar chemical composition that were subjected to identical thermal treatments. This procedure was applied to modern pottery donated by indigenous people and to a set of archaeological pottery. The modern pottery that was used for cooking for two years exhibited higher Fe3+ concentrations than the clay that was fired at any temperature; thus, the parameters of production were not identified in this pottery. The same procedure can be used to identify the use of a piece of pottery as a pan. Of the set of 14 pieces of archaeological pottery examined in this study, 12 were able to have their production parameters identified, and 2 fragments were identified with Fe3+ concentrations that were higher than that of the fired clay, suggesting that these pieces were used as pans. The results of this study indicate that the concentration of Fe3+ can be used to determine if a piece of pottery was used for cooking; additionally, if a piece of pottery was not used for cooking, then the proposed method can identify the parameters of the piece of pottery's production.

• 出版日期2016-8