An effective method for comparing the turbulence intensity from LDA measurements and CFD predictions within a ship propeller jet

作者：Lam W H^*; Robinson D J; Hamill G A; Johnston H T

来源：Ocean Engineering, 2012, 52: 105-124.

DOI：10.1016/j.oceaneng.2012.06.016

• Ship propeller jet
• Turbulence intensity
• Laser doppler anemometry
• Computational fluid dynamics
• Turbulence model
• Seabed scour

The mean velocity and turbulence intensity are the two main inputs to investigate the ship propeller induced seabed scouring resulting from a vessel is manoeuvring within a port where the underkeel clearances are low. More accurate data including the turbulence intensity is now available by using the laser doppler anemometry (LDA) measurement system and computational fluid dynamics (CFD) approach. Turbulence intensity has a loose definition, which is the velocity fluctuation as the root mean square (RMS) referenced to a mean flow velocity. However, the velocity fluctuation and mean velocity can be the overall value including x, y and z directions or the value of a single component. LDA and CFD results were obtained from two different acquisition systems (Dantec LDA system and Fluent CFD package) and therefore the outputs cannot be compared directly. An effective method is proposed for comparing the turbulence intensity between the experimental measurements and the computational predictions within a ship propeller jet. The flow patterns of turbulence intensity within a ship propeller jet are presented by using the LDA measurements and CFD results from turbulence models of standard k - epsilon, RNG k - epsilon, realizable k-epsilon, standard k-omega, SST k-omega and Reynolds stresses.

• 出版日期2012-10-1