摘要
We report a high-speed inkjet-printed three-terminal microelectromechanical(MEM) relay with a doubleclamped beam that exploits the enhanced stiffness of the double-clamped structure to improve electrical performance. To minimize mechanical delay and pull-in voltage, the contact gap between the channel-beam and drain, and the stiffness of the beam and shape of the drain was carefully designed and optimized through a 3-D finite element simulation. The double-clamped beam prevents stiction-related failure between the channel-beam and drain despite the contact gap being only 370 nm for a > 500 mu m long beam. The resulting printed relay delivers a turn-ON delay of 8 mu s at a gate voltage of 10 V, a pull-in voltage of only 7.2 V, immeasurable off-leakage, excellent subthreshold swing, and a small hysteresis window of 2 V without any bending or collapsing of the beam. The device also shows reliable operation over 105 cycles while maintaining a high ON/OFF ratio of 108, and extremely low ON-state resistance
- 出版日期2017-2