An entropy generation and genetic algorithm optimization of two-bed adsorption cooling cycle

作者：Myat A^*; Thu K; Ng K C; Kim Y D

来源：Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering, 2012, 226(E2): 142-156.

DOI：10.1177/0954408911416439

• adsorption cooling
• entropy generation
• minimization
• silica gel
• waste heat recovery
• genetic algorithm

This article presents the performance analysis of adsorption cooling, shortly AD, system using a thermodynamic framework with an entropy generation analysis. The model captures the transient and the cyclic steady-state performances of the adsorption-desorption cycles operating under assorted heat source temperatures. Type-RD silica gel, with a pore surface area of 720 m(2)/g and diameters 0.4-0.7 mm, is used as an adsorbent and its high affinity for the water vapour adsorbate gives a high equilibrium uptake. The key advantages of the AD are (a) it has no moving parts rendering less maintenance and (b) the energy efficient means of cooling by the adsorption process with a low-temperature heat source and (c) it is environmental friendly with low carbon footprint. By incorporating the genetic algorithm onto the entropy minimization technique, it is possible to locate the optimal system performance point or the global minima with respect to entropy generation using the system parameters such as coolant and heat source water temperatures, heat transfer areas, etc. The system analysis shows that the minimization of entropy generation in the AD cycle leads to the maximization of the coefficient of performance and this translates into a higher delivery of useful cooling effects at the particular input resource temperature.

• 出版日期2012-5