Hysteresis of Colloid Retention and Release in Saturated Porous Media During Transients in Solution Chemistry

作者：Torkzaban Saeed; Kim Hyunjung N; Simunek Jiri; Bradford Scott A^*

来源：Environmental Science & Technology, 2010, 44(5): 1662-1669.

DOI：10.1021/es903277p

Saturated packed column and micromodel transport studies were conducted to gain insight on mechanisms of colloid retention and release under unfavorable attachment conditions. The initial deposition of colloids in porous media was found to be a strongly coupled process that depended on solution chemistry and pore space geometry. During steady state chemical conditions, colloid deposition was not a readily reversible process, and micromodel photos indicated that colloids were immobilized in the presence of fluid drag. Upon stepwise reduction in eluting solution ionic strength (IS), a sharp release of colloids occurred in each step which indicates that colloid retention depends on a balance of applied (hydrodynamic) and resisting (adhesive) torques which varied with pore space geometry, surface roughness, and interaction energy. When the eluting fluid IS was reduced to deionized water, the final retention locations occurred near grain-grain contacts, and colloid aggregation was sometimes observed in micromodel experiments. Significant amounts of colloid retention hysteresis with IS were observed in the column experiments, and it depended on the porous medium (glass beads compared with sand), the colloid size (1.1 and 0.5 mu m), and on the initial deposition IS. These observations were attributed to weak adhesive interactions that depended on the double layer thickness (e.g., the depth of the secondary minimum and/or nanoscale heterogeneity), colloid mass transfer on the solid phase to regions where the torque and force balances were favorable for retention, the number and extent of grain-grain contacts, and surface roughness.

• 出版日期2010-3-1