科研之友
微信
新浪微博
Facebook
分享链接
摘要
High permittivity CaCu3Ti4O12/poly(vinylidenefluoride-co-hexafluoropropylene) P(VDF-HFP) nanocomposites were investigated as dielectrics for film capacitors. CaCu3Ti4O12 was synthesized by two different soft-chemistry methods, namely, decomposition of a citrate precursor and a recently developed lactate precursor to identify a preferable route to nanometer scale spherical particles with an increased interfacial area. A ball-milling step was applied to break particle agglomerates and to enhance particle distribution in the composite films. To improve the wetting of the CaCu3Ti4O12 oxide particles and the polymer, a variety of surfactants, e.g. carbonic acid, silane, sulfonic acid and phosphonic acid were investigated. A successful oxide surface functionalization was achieved by 2,3,4,5,6-pentafluorobenzyl phosphonic acid, leading to stable bonds and good structural compatibility between the surfactant and the highly fluorinated polymer matrix. The films were prepared from composite dispersions by a spin-coating technique and can be formed out of powders from both precursors, but the citrate method is preferable due to milder synthesis conditions and improved film homogeneity. The use of ball-milled powders as the oxide component results in homogeneous particle distributions even near to the percolation threshold. In addition, such fine-ground particles lead to homogeneous film thickness and decreased film roughness. Dielectric measurements at different frequencies revealed an enhancement in the relative permittivity by a factor of 5 compared to the pure polymer while the dielectric losses remained very low.
- 出版日期2014
