科研之友
微信
新浪微博
Facebook
分享链接
摘要
"Sodium fluoride (F-18) injection" is an isotonic NaCl solution containing [F-18]NaF to be used as bone imaging agent. Although its NDA was approved by the US FDA in 1972, it has not been commercially available since 1975 due to mostly the popularity of Tc-99m-MDP. Recently, advances in PET/CT technology and the often interrupted Tc-99m supply have led to the renewed interest in the use of [F-18]NaF to detect bone metastases in cancer patients. This report introduces an efficient, low-cost and aseptic preparation of "Sodium fluoride (F-18) injection" for PET scan.
F-18-Fluoride in target water from cyclotron was adsorbed onto four different forms of anion-exchange resins then desorbed by isotonic NaCl solution into the product vial. One of the resins that yielded the product at the suitable pH was used for the aseptic preparation. The components for this setup, including stopcocks, extension tubes, etc., were all single-use, individually packed and sterile. The process was done in a lead-line isolator maintained in grade A (PIC/S) aseptic condition. The quality of the obtained "Sodium fluoride (F-18) injection" was analyzed according to its monograph in the European Pharmacopoeia (EP).
The resin in the chloride form yielded the product of pH 6.7 and was chosen for the subsequent preparation. The radiochemical yield was quantitative. The product met all criteria specified in EP, including biological, physical and chemical specifications.
This method is an efficient, space-saving and extremely low-cost operation that easily performed in an aseptic environment meeting GMP standard. The quality of the "Sodium fluoride (F-18) injection" so yielded meets EP specifications. This setup provides hospital with facility meeting GMP standard a cost effective and efficient method for "Sodium fluoride (F-18) injection" production without the need for the expensive automatic module and extra QC instrument.
- 出版日期2010-4
