科研之友
微信
新浪微博
Facebook
分享链接
摘要
Geomechanical changes may occur in reservoirs due to production from reservoirs. Study of these changes has an important role in upcoming operations. Frictional equilibrium is one of the items that should be determined during the depletion as it may vary with respect to time. Pre-existing faults and fractures will slide in regions where there is no frictional equilibrium. Hence, it may be concluded that reduction in pore pressure can initiate the sliding of faults. Whereas, it is also possible that faults will not exist after a certain time as production recovers the equilibrium. Casing shearing or lost circulation may be occurred due to faulting. In reservoirs which depletion leads to frictional equilibrium, decrease of fractures and faults leads to some variations in permeability. Hence, predicting the effect of depletion on frictional equilibrium is required in dealing with casing shearing or lost circulation in drilling of new wells. In addition, permeability modeling will be more precise during the life of reservoirs. Estimation of necessary time to create or vanish faults is vital to be successful in production from wells or drilling new wells. Achieving or loosing of equilibrium mainly depends on in situ stresses and rate of production. Estimation of the in situ stresses at the initiation state of reservoir is the key to study the state of faults. The next step is to predict the effects of depletion on in situ stresses. Different models are suggested in which decrease of horizontal stresses is predicted as function of pore pressure variation. In these models, different assumptions are made such as simplifying the poroelastic theory, ignoring the passing time, and considering the geometry of reservoir. In this article, a new model is proposed based on theory of inclusions and boundary element method. This state-of-the-art model considers the geometry of reservoir. In addition, changes of in situ are obtained as a function of time to reach to a more precise model capable of applying during the reservoir life. Finally, the model is imposed on real cases. The effect of depletion on faults is studied in reservoirs of normal and strike-slip stress regimes, and conventional and proposed models are compared. For this aim, in the first step, mechanical earth models of these two reservoirs are built using logging and coring data. Stress polygon method and poroelastic horizontal strain model are used for strike-slip and normal regimes, respectively. In reservoir 1 which is in a strike-slip stress regime, a fault is distinguished in formation microimaging (FMI) log. For this reservoir, the required time to achieve to frictional equilibrium is calculated. In the reservoir 2, the potential depth of fault sliding is analyzed and required time for faulting in that depth is predicted. The predicted time for satisfaction of frictional equilibrium using the proposed model has a significant difference with the predicted time using the previous methods. In addition, the proposed model predicts that different parts of reservoir 2 are willing for faulting during depletion. The previous model determines only one point that faulting may happen. It is necessary to use this new model to consider different important factors such as geometry and time to gain more accurate predictions.
- 出版日期2017-9
