Degradation of mechanical and corrosion resistance properties of AISI 317L steel exposed at 550 degrees C

作者：Farneze H N; Tavares S S M^*; Pardal J M; do Nascimento R F; de Abreu H F G

来源：Engineering Failure Analysis, 2016, 61: 69-76.

DOI：10.1016/j.engfailanal.2015.08.044

• AISI 317L
• Aging
• Pitting corrosion
• Deleterious phases

The use of austenitic stainless steel type AISI 317L has increased in the last years, in substitution to AISI 316L and other austenitic grades. The higher Mo content (3.0 wt.%. at least) gives higher corrosion resistance to AISI 317L. However, some concern arises when this material is selected to high temperature process services in refineries. Microstructural changes such as chromium carbide precipitation and sigma phase formation may occur in prolonged exposure above 450 degrees C. In this work, the microstructure evolution of AISI 317L steel during aging at 550 degrees C was analyzed. Thermodynamic calculations with Thermocalc (R) and detailed microstructural analysis were performed in steel plate base metal and in weld metal produced by GTAW process. The aging for 200, 300 and 400 h promoted gradual embrittlement and deterioration of corrosion resistance of both weld and base metal. The results show that the selection of AISI 317L steel to services where temperatures can reach 550 degrees C is not recommended.

• 出版日期2016-3