A framework for estimating residual stress profile in seam-welded pipe and vessel components part I: Weld region

作者：Song Shaopin; Dong Pingsha^*

来源：International Journal of Pressure Vessels and Piping, 2016, 146: 74-86.

DOI：10.1016/j.ijpvp.2016.07.009

• Residual stresses
• Finite element
• Seam welds
• Residual stress profile
• Fitness-for-service
• Membrane and bending decomposition
• Curved beam

A recent comprehensive investigation into residual stress distributions in pipe and vessel longitudinal seam welds is presented in this paper, covering component wall thickness from 1/4" (6.35 mm) to 10" (254 mm), component radius to wall thickness ratio from 2 to 20, and linear welding heat input from low (50 J/mm) to high (6000 J/mm). Through the use of a residual stress decomposition technique, two key parameters that govern through-thickness residual stress distributions in terms of their membrane and bending content have been identified. One is component radius to wall thickness ratio (r/t) and the other is a characteristic heat input density ((Q) over cap) having a unit of J/mm(3). With these two parameters, a unified functional form for estimating through-thickness residual stress profile in seam welded components is proposed in this paper (Part I) for supporting fitness for service assessment for crack-like flaws in weld region. A curved beam bending theory based model is introduced in Part II as a means of analytically describing through-thickness residual stress profile as a function of circumferential position away from the weld region until residual stresses become zero. The effectiveness of this proposed framework for achieving residual stress profile estimation within weld region (Part I) for longitudinal seam welds in pressure vessel and piping components has been confirmed by finite element residual stress analysis results on a large number of component configurations and different welding conditions.

• 出版日期2016-10