摘要

The micromechanisms of plastic deformation and void growth were analyzed using discrete dislocation dynamics in an isolated FCC single crystal deformed in-plane strain in the (I 10) plane. Three different stress states (uniaxial tension, uniaxial deformation and biaxial deformation) were considered for crystals oriented in different directions and with a different number of active slip systems. It was found that strain hardening and void growth rates depended on lattice orientation in uniaxial tension because of anisotropic stress state. Crystal orientation did not influence, however, hardening and void growth when the crystals were loaded under uniaxial or biaxial deformation because the stress state was more homogeneous, although both (hardening and void growth rates) were much higher than under uniaxial tension. In addition, the number of active slip systems did not substantially modify the mechanical behavior and the void growth rate if plastic deformation along the available slip systems was compatible with overall crystal deformation prescribed by the boundary conditions. Otherwise, the incompatibility between plastic deformation and boundary conditions led to the development of large hydrostatic elastic stresses, which increased the strain hardening rate and reduced the void growth rate.

  • 出版日期2010-6