科研之友
微信
新浪微博
Facebook
分享链接
摘要
There exist errors between the manufactured workpieces and the CAD models due to the springback of sheet-metal incremental air-bending forming. To reduce these errors, an off-line closed-loop control iterative algorithm, combined by fast Fourier and wavelet transform, is developed from the displacement adjustment method (DAM), smooth displacement adjustment method (SDAM) and deformation transfer function method (DTFM) for die surface. With this algorithm, the mould surface of sheet-metal incremental air-bending forming could be properly corrected, and the springback errors of the formed workpieces could be effectively reduced. In order to reduce mould cost and labor cost, the springback tests of workpieces forming, needed in the iterative process of closed-loop control system, are substituted by finite element model (FEM) simulation. The above correction algorithm was used in a semiellipse-shape workpiece incremental air-bending forming. Its average errors are 0.74/-0.39 mm. The results show that the mould correction algorithm with Fourier and wavelet transform is reasonable and the means of FEM simulation are effective. It can be taken as a new approach for sheet-metal multistep incremental air-bending forming and mould design.
