A modelling technique for calculating stress intensity factors for structures reinforced by bonded straps. Part II: Validation

作者：Boscolo M; Zhang X^*

来源：Engineering Fracture Mechanics, 2010, 77(6): 896-907.

DOI：10.1016/j.engfracmech.2010.01.005

• Bonded crack retarders
• Selective reinforcement
• Fatigue crack growth life
• Thermal residual stresses
• Delamination
• Secondary bending
• Composite patch repairs

In this second part of the two-part paper validation of the 2D FE modelling technique described in the first part is presented for a range of test configurations. Each mechanism that influences crack growth behaviour of strap reinforced structures is modelled for different substrate geometries, strap materials and dimensions in order to test the accuracy and robustness of the methodology. First, calculated through-thickness strain energy release rate distribution is compared with the result of a 3D FE model to validate this 2D model. Second, calculated disbond areas, thermal residual stresses and their redistribution with crack propagation are validated against experimental measurements. Third, influence of geometric nonlinearity and the need to use the alternate analysis method described in part I are demonstrated by examples, and errors generated by not following this analysis rule are given. Finally, using the 2D model calculated stress intensity factors, fatigue crack growth rates and lives are predicted for different specimens, strap materials and applied stress levels and are compared with the experimental tests. Good or acceptable agreement has been achieved for each case.

• 出版日期2010-4