科研之友
微信
新浪微博
Facebook
分享链接
摘要
It is the key issue for the seam tracking to obtain the high quality images which are convenient to be processed in arc welding process shielded by the gas of CO2. Firstly, on the basis of the principle that reflectors with curved surface reflect arc, a structure with the paraboloid of the reflecting mirror was constructed on the welding torch of the robot. The structure can produce parallel light by dint of arc which irradiates the area monitored by the CCD camera. The lum of the area is limited to the extent that is adapt to the camera. Secondly, the usability of the obtained images was discussed according to the characteristics of the welding process of short-circuit transfer and the directions of splash. Based on the algorithm of robot difference-moving, the obtained images were processed. The result of experiments has proved the validity of the method.
- 出版日期2008-4
- 单位华南理工大学
