摘要

This paper presents a continuous-rate reference-less clock and data recovery (CDR) circuit that utilizes common-mode clock-embedded signaling (CM-CES) and injection locking techniques to reduce design complexity for the half-rate data recovery. In the proposed receiver, the use of wideband injection-locked oscillator (ILO) greatly suppresses its phase noise while the narrowband digital phase tracking loop (DPTL) tunes retiming phase. For wide-range and continuous-rate operation, four circuit techniques have been adopted: a VCO with active inductance load for low VCO gain at high frequency, a wide-range digitally-controlled delay line (DCDL) with adaptive band selection, a linearized delay control unit with CM-to-delay conversion technique, and a coarse frequency detection scheme to drive the free-running oscillator frequency toward injection locking. The prototype CDR, fabricated in low power CMOS 65 nm technology, successfully detects 0.8-6.5 Gb/s data rates over 5 '' FR4 trace with 2(31) - 1 PRBS pattern satisfying BER < 10-12. The power efficiency was 2.4 mW/Gb/s at 6.5 Gb/s.

  • 出版日期2016-4