科研之友
微信
新浪微博
Facebook
分享链接
摘要
A facile route was used to modify Al particle surfaces by putting Al particles into an Al(OH)(3) suspension, which was produced by the reaction of Al powder with water under vacuum at a mild temperature, then drying and heat-treating under vacuum at elevated temperature. The modified Al powder has a good reaction activity with water to generate hydrogen, and its reaction rate depends on the sizes of Al particles used to produce Al(OH)(3) suspension. The reaction induction time of the modified Al powder prepared using the Al(OH)(3) suspension produced by the reaction of Al with water is obviously shorter than that prepared using the Al(OH)(3) suspension formed by the direct addition of a commercial Al(OH)(3) powder, because the in situ formed Al(OH)(3) has a finer microstructure. As the present method has no complicated processing procedure and the Al-water reaction byproduct can be reused to modify Al, it is an economically viable way to fabricate the activated Al powder for commercial applications.
- 出版日期2014-1
- 单位上海大学
