科研之友
微信
新浪微博
Facebook
分享链接
摘要
Assemblies of TZM alloy with alumina were obtained with a two-step process, much shorter than moly-manganese brazing methods. This new process involves, first, the preoxidation of the alloy in air at 795 degrees C, followed by hot-pressing in flowing argon, at 1700 degrees C under 22 MPa. The adherence of the joints, higher than 45 MPa, was explained by two complementary reasons: i) a mechanical contribution, of "tenon and mortise" type and ii) the penetrations of secondary phases (MoO2 and minor phases coming from alumina additives) into both materials that play the role of nails joining the alloy and the ceramics.
- 出版日期2018-5
