Adhesion Strength of HVOF Sprayed IN718 Coatings

作者：Lyphout Christophe^*; Nylen Per; Ostergren Lars Gosta

来源：Journal of Thermal Spray Technology, 2012, 21(1): 86-95.

DOI：10.1007/s11666-011-9689-y

• adhesion strength
• diagnostics tools
• HVOF
• Inconel 718
• particle state
• processing
• properties
• residual stress

The adhesion strength of high-velocity oxyfuel thermally sprayed coatings is of prime importance when thick coatings are to be sprayed in repair applications. In this study, relationships between process parameters, particle in-flight characteristics, residual stresses, and adhesion strength were explored. The most important process parameters that influence HVOF sprayed IN718 coating adhesion strength on IN718 substrate material were identified. Residual stress distributions were determined using the modified layer removal method, and adhesion strength was measured using an in-house-developed tensile test. Relationships between process parameters, particle in-flight characteristics, coating microstructure, and adhesion strength were established. Particle temperature, particle velocity, substrate preparation, and deposition temperature were identified as critical parameters to attain high adhesion strength. Controlling these parameters can significantly improve the adhesion strength, thus enabling thick coatings to be sprayed for repair applications.

• 出版日期2012-1