A new concept of feature-based gauge for coordinate measuring arm evaluation

作者：Cuesta E^*; Gonzalez Madruga D; Alvarez B J; Barreiro J

来源：Measurement Science and Technology, 2014, 25(6): 065004.

DOI：10.1088/0957-0233/25/6/065004

• feature-based gauge
• coordinate measuring arm
• CMA
• AACMM
• evaluation

Articulated arm coordinate measuring machines (AACMM or CMA) have conquered a market share in the actual dimensional metrology field, overall when their role implies the inspection of geometrical and dimensional tolerances in an accurate 3D environment for medium-size parts. However, the unavoidable fact of AACMM manual operation constrains its reliability to a great extent, avoiding rigorous evaluation and casting doubt upon the usefulness of external calibration. In this research, a dimensional gauge especially aimed at AACMM evaluation has been developed. Furthermore, the operator skill will be revealed through the use of this gauge. A set of geometrical features, some of them oriented to evaluate the operator and others the equipment, have been collected for the gauge. The proposed evaluation methodology clearly distinguishes between dimensional and geometrical tolerances (with or without datum references), whereas actual verification standards only consider the former. Next, quality indicators deduced from the measurement results are proposed in order to compare AACMM versus coordinate measuring machine (CMM) performance, assuming that CMM possess the maximum accuracy that AACMM could reach, because CMM combines maximum contact accuracy with minimum operator influence. As a result, AACMM evaluation time could be significantly reduced since this gauge allows us to perform a customized evaluation of only those specific tolerances of interest to the user.

• 出版日期2014-6