Development of a low-temperature two-stage fluidized bed incinerator for controlling heavy-metal emission in flue gases

作者：Peng Tzu Huan; Lin Chiou Liang; Wey Ming Yen^*

来源：Applied Thermal Engineering, 2014, 62(2): 706-713.

DOI：10.1016/j.applthermaleng.2013.10.027

• Low-temperature
• Two-stage treatment
• Fluidized bed
• Heavy metals
• Incineration

This study develops a low-temperature two-stage fluidized bed system for treating municipal solid waste. This new system can decrease the emission of heavy metals, has low construction costs, and can save energy owing to its lower operating temperature. To confirm the treatment efficiency of this system, the combustion efficiency and heavy-metal emission were determined. An artificial waste containing heavy metals (chromium, lead, and cadmium) was used in this study. The tested parameters included first-stage temperature and system gas velocity. Results obtained using a thermogravimetric analyzer with a differential scanning calorimeter indicated that the first-stage temperature should be controlled to at least 400 C. Although, a large amount of carbon monoxide was emitted after the first stage, it was efficiently consumed in the second. Loss of the ignition values of ash residues were between 0.005% and 0.166%, and they exhibited a negative correlation with temperature and gas velocity. Furthermore, the emission concentration of heavy metals in the two-stage system was lower than that of the traditional one-stage fluidized bed system. The heavy-metal emissions can be decreased by between 16% and 82% using the low-temperature operating process, silica sand adsorption, and the filtration of the secondary stage.

• 出版日期2014-1-25