A device for testing the dynamic performance of in situ force plates

作者：East Rebecca H^*; Noble Jonathan J; Arscott Richard A; Shortland Adam P

来源：Proceedings of the Institution of Mechanical Engineers - Part H: Journal of Engineering in Medicine , 2017, 231(9): 923-927.

DOI：10.1177/0954411917712538

• Dynamic calibration check
• force plate
• gait analysis
• dynamics

Force plates are often incorporated into motion capture systems for the calculation of joint kinetic variables and other data. This project aimed to create a system that could be used to check the dynamic performance of force plate in situ. The proposed solution involved the design and development of an eccentrically loaded wheel mounted on a weighted frame. The frame was designed to hold a wheel mounted in two orthogonal positions. The wheel was placed on the force plate and spun. A VICON motion analysis system captured the positional data of the markers placed around the rim of the wheel which was used to create a simulated force profile, and the force profile was dependent on spin speed. The root mean square error between the simulated force profile and the force plate measurement was calculated. For nine trials conducted, the root mean square error between the two simultaneous measures of force was calculated. The difference between the force profiles in the x- and y-directions is approximately 2%. The difference in the z-direction was under 0.5%. The eccentrically loaded wheel produced a predictable centripetal force in the plane of the wheel which varied in direction as the wheel was spun and magnitude dependent on the spin speed. There are three important advantages to the eccentrically loaded wheel: (1) it does not rely on force measurements made from other devices, (2) the tests require only 15min to complete per force plate and (3) the forces exerted on the plate are similar to those of paediatric gait.

• 出版日期2017-9