科研之友
微信
新浪微博
Facebook
分享链接
摘要
Thermal single-well injection-withdrawal (SWIW) tests entail pumping cold water into a hot and usually fractured reservoir, and monitoring the temperature recovery during subsequent backflow. Such tests have been proposed as a potential means to characterize properties of enhanced geothermal systems (EGS), such as fracture spacing, connectivity, and porosity. In this paper we develop an analytical solution for thermal SWIW tests, using an idealized model of a single vertical fracture with linear flow geometry embedded in impermeable conductive wall rocks. The analytical solution shows that the time dependence of temperature recovery is dominated by the heat exchange between fracture and matrix rock, but strong thermal diffusivities of rocks as compared to typical solute diffusivities are not necessarily advantageous for characterizing fracture-matrix interactions. The effect of fracture aperture on temperature recovery during backflow is weak, particularly when the fracture aperture is smaller than 0.1 cm. The solution also shows that temperature recovery during backflow is independent of the applied injection and backflow rates. This surprising result implies that temperature recovery is independent of the height of the fracture, or the specific fracture-matrix interface areas per unit fracture length, suggesting that thermal SWIW tests will not be able to characterize fracture growth that may be achieved by stimulation treatments.
- 出版日期2012-3-3
