科研之友
微信
新浪微博
Facebook
分享链接
摘要
The feasibility of utilizing the shear lag theory to estimate crack density in fabric reinforced composites was investigated. A geometric model was constructed for the fabric and meshed using a hybrid finite element approach. The small segment of the yarn and the surrounding matrix enclosed within each element were treated as a unidirectional composite and the shear lag theory was used to estimate the crack density. Model results were compared to experimental data for a 5-harness satin melt-infiltrated SiC/SiC composite under tension and showed a pattern similar to experimental data with the model starting to accumulate cracks at a stress corresponding to the point of departure from linearity in the stress-strain curve while cracks were experimentally observed around 60MPa higher. The model and experimental data had a similar value for the crack density at the saturation level. Sensitivity analysis showed that the crack density was highly sensitive to the fiber volume fraction in the load direction followed by the weave angle of the crimped segments of the yarns and the interfacial shear strength between the fibers and the matrix.
- 出版日期2015-8
